Millers Oils NANODRIVE CFS 5w-40 NT+ Full Synthetic Engine Oil

Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more! 

Dragy uses high speed GPS satellites to accurately measure your vehicles performance within 1/100th of a second, producing identical results to the much more expensive and cumbersome VBOX system, in a less expensive and easier to use package. The Dragy software automatically charts slope on all timeslips which you can then post to forums or social media, share with friends, or even upload to the Dragy leader board. The Dragy box is extremely compact at 1" x 3" (25.4mm x 76.2mm) and can be set on the dash when testing and stored in the glove box or center console when not in use.

In addition there are many advanced features under development including superimposing performance data over your mobile camera, virtual races with friends, an internal feed for photos and performance discussion, and more to come. Runs are saved in both metric and SAE formats, allowing comparisons of 100-200kmh and all metric equivalents. You can also define your own performance windows for measuring both trap speeds and/or elapsed times, time to brake performance such as 100-0, and much more.

The system can be run simultaneously with JB4 Mobile and other bluetooth apps. Requires the Dragy app which is available free of charge for both iOS and Android.

Features:
Measure acceleration (0-100kmh, 100-200kmh, 1/4 mile and more) 
Measuring braking time (100-0kmh, 200-0kmh and much more) 
Lap Time (available soon) 
G-force measurement 
Highscore list sorted by manufacturer 
Dragy 
Video Drag and Drop 
Profile (garage, profile picture and much more)

Box contents:
Dragy Performance Box Lap and Accelerometer 
USB charging cable 
2x metal plates and 3M adhesive strip 
Manual 

Technical data:
iOS (8.0) or Android (4.4) device required 
Metric unit system (km / h) supported 
Connection type: Bluetooth 4.0 
Supports GPS and GLONASS 
Battery life: up to 10 hours 
Dimensions: 30 x 80 x 15mm 

Millers Oils NANODRIVE CFS 5w-40 NT+ Full Synthetic Engine Oil

Extract every ounce of cooling efficiency from Koyorad All Aluminium Performance Radiators with a genuine Koyorad Hyper Cap! This Koyorad Hyper Cap withstands an increased valve pressure rating of 1.3kgf/cm2 (1.3 bar) (18.9 psi) (130 kPa) which increases the boiling point of water and relieves high performance engines of excessive heat. A genuine Koyorad Hyper Cap is recommended for use with every Koyorad All Aluminium Performance Radiator (when applicable). This Koyorad Hyper Cap is manufactured in Japan from high quality components to ensure longevity and performance from your Koyorad Racing radiator.

Why is increased Pressure Better?

It’s simple. When water is pressurized, its natural boiling point is increased. Most modern vehicles are equipped with a 0.9 Bar pressure cap. Koyorad’s Hyper Cap is rated at 1.3 Bar which increases the boiling temperature of your coolant to 267.80 degrees Fahrenheit. That is nearly a 56 degree increase over water's normal boiling point. By increasing the boiling point of water, an engine's cooling system will have the added heat capacity, maximizing performance under ever-changing racing conditions.

KOYORAD: Performance radiator cap

Brand: KOYORAD
Part Number: SK-C13

Stock images used. Actual product may vary.

Motul RBF 600 factory line brake fluid is a 100% synthetic brake fluid particularly suitable for the demands of racing and for those who require a high performance brake fluid. 

Motul RBF 600 is a DOT 4 brake fluid which is particularly suitable for race applications and exceeds the DOT 5.1 and DOT 3 standards, except for viscosity at - 40°C (-40°F). This enables effective braking even under extreme conditions.

RBF 600 brake fluid is suitable for all types of hydraulic actuated brake and clutch systems requiring a non silicone fluid.

Dry Boiling Point - 312 degrees Celsius

Wet boiling point - 216 degrees Celsius

Sold in 500ml bottles.

Millers Oils Racing Brake Fluid 300 Plus

• Millers Oils Racing Brake Fluid 300+
• Millers Racing Brake Fluid 300 Plus
• Millers competition brake fluid

Millers Oils NANODRIVE CFS 0w-30 NT+ Full Synthetic Engine Oil

Recommended for modern competition engines where maximum power release is required and beneficial for high revving engines, a lower viscosity oil with extremely high anti wear characteristics it is specifically formulated for use in qualifying or shorter duration events. A fully Synthetic Triple Ester Nano Technology Formulation for modern competition engines where maximum power release and ultra low friction are required.

For competition engines where maximum power release is the preferred criteria, especially for qualifying or shorter duration events where the engine has been designed for this type of crankcase lubricant.

Fully synthetic Triple Ester Nano Technology Oil.

Millers Oils NANODRIVE CFS 10w-60 NT+ Full Synthetic Engine Oil

Fully Synthetic Triple Ester Nano Technology ultra low friction formulation. Ideal for fast road, competition and race use and also specific for larger race and rally engines, with or without turbochargers. Especially suited to vehicles that are subject to severe high stress conditions and highly beneficial to high revving engines.

For competition or high performance modified engines. Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards.

Fully synthetic Triple Ester Nano Technology oil.

Millers Oils NANODRIVE CFS 0w-20 NT+ Full Synthetic Engine Oil

Recommended for modern competition engines where maximum power release is required and beneficial for high revving engines, a lower viscosity oil with extremely high anti wear characteristics it is specifically formulated for use in qualifying or shorter duration events. The fully Synthetic Triple Ester Nano Technology Formulation is for modern competition engines where maximum power release and ultra low friction are required.

For competition engines where maximum power release is the preferred criteria, especially for qualifying or shorter duration events where the engine has been designed for this type of crankcase lubricant.

Fully synthetic Triple Ester Nano Technology Oil.

AeroCatch Bonnet/Hood Pins are leading the way in style, functionality and aerodynamics in the 21st century. (THESE BOLT DOWN FROM ABOVE)

The 120 Series offers modern aerodynamic styling combined with light weight, high strength construction, making it a popular choice across a variety of motorsport applications. 

With a large selection of distributors in the UK and across the globe, AeroCatch are the bonnet/hood pin of choice for many professional motor racing teams, the tuning scene and car enthusiasts.

Available in both locking and non-locking options.

Each kit contains all the necessary components to fit immediately and a cardboard template to assist with panel preparation.

Endless MX72 Performance Brake Pads - HONDA NSX* 1991 - 2005 - Rear Brake Pads EP271

Endless MX72 Performance Brake Pads - HONDA NSX* 1991 - 2005 - Front Brake Pads EP270

Endless CC38(ME20)/CC40(ME22) Circuit Brake Pads - HONDA NSX 1991 - 2005 - Front Brake Pads EP270

Endless MX72 Plus Performance Brake Pads - HONDA NSX 1991 - 2005 - Front Brake Pads EP270

Endless MX72 Plus Performance Brake Pads - HONDA NSX 1991 - 2005 - Rear Brak Pads EP271

Endless Super Street S-Sports Brake Pads - HONDA NSX 1991 - 2005 Front Brake Pads EP270

Endless Super Street S-Sports Brake Pads - HONDA NSX 1991 - 2005 Rear Brake Pads EP271

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê

How will a Pipercross panel filter benefit you?

• Directly replaces the air filter in your airbox
• 30% more airflow over a standard paper air filter
• Longer lifespan before cleaning required over cotton
• Easy cleaning, no dirt caught like with V shaped filter grooves
• Bench tested for improved fuel economy, power and torque outputs
• Lifetime warranty on all replacement and performance road use filters

Unlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why?ÊBecause foam has a larger capacity for filtration over cotton or paper.ÊIn road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform.

TheÊlow maintenance and long lifespanÊaspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures anÊexceptional level of engine protection in any conditions.

Why are Pipercross foam filters better than the competition?

Pipercross, based in the UK home of motorsport have overÊ25 years of road and track racing experienceÊwhen it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?ÊBelow are just some of the Pipercross sponsored winning teams.

• British Touring Car Championship:ÊAirwaves Racing
• British Drift Championship:ÊTeam Falken, Acorn Motorsport
• Irish Drift Championship:ÊTeam Falken James Deane and Alan Sinnot
• European Drift Championship:ÊDmitriy Illyuk - Monster Energy and NC Drifting
• World Rallycross:ÊLiam Doran Monster Energy
• Time Attack:ÊEurospec, DAR and Bo Nielson

How is a Pipercross air filter manufactured?

All Pipercross air filters are manufactured right here in the UK. At the Northamptonshire headquarters and manufacturing facility all filters areÊhand made carefully to ensure you are always receiving the best qualityÊtoday on the automotive aftermarket. Pipercross pride themselves on being British manufactured and will never outsource for cheaper or lesser quality processes.Ê